SoilVue 10 TDR Soil Moisture Profile Sensor
Economical
Easy to Install
Excellent Soil Contact
clima estudos de caso água estudos de caso energia estudos de caso gas flux and turbulence estudos de caso infraestrutura estudos de caso terra estudos de caso

Visão Geral

The SoilVue™10 is a soil water content profile sensor powered by Campbell TrueWave™TDR technology. This soil moisture, electrical conductivity, and temperature profile sensor was developed with environmental researchers and environmental monitoring networks in mind. The SoilVue 10 represents several exciting advancements in in-situ soil measurement that should make this an extremely compelling option for anyone in these applications who needs to make multiple measurements in a profile. 

Campbell Scientific’s proprietary TrueWave TDR technology combines a best-in-class rise time with an advanced waveform analysis technique to determine the true travel time of a high-frequency pulse. This process achieves a high-resolution, smooth signal for measurements that are defensible and can be universally compared with other TDR measurements. Not all TDR-based sensors perform equally well.  

Leia mais

Benefícios e Características

  • Measures VWC, permittivity, EC, and temperature
  • Six or nine depths measured with one sensor
  • Quick and low-impact installation
  • Digital output is compatible with most Campbell Scientific data loggers
  • Designed for long-term outdoor operation
  • TrueWave TDR technology is proven and trusted

imagens

Descrição Técnica

The SoilVue 10 consists of TDR circuitry connected to a series of six or nine helical wave guides that make up part of the overall threaded design. The threaded design with individual sensors built into the threads improves sensor contact with the soil to reduce potential error from air gaps. The TDR circuitry generates a short rise time electromagnetic pulse that is applied to the helical wave guides. The elapsed two-way travel time of the applied pulse is used to calculate the dielectric permittivity of the surrounding media and determine the volumetric water content using a mixing model.

The soil water content profile sensor can be installed in a hole made by a standard 5 cm (2 in.) hand auger. Excavation machinery or expensive custom tools are not necessary to install the sensor.

The included cable has an IP67 rated M12 connector that is detachable from the sensor for easy field replacement if the cable becomes damaged.

Especificações

Measurements Made Volumetric water content (VWC), permittivity, electrical conductivity (EC), and temperature
Operating Temperature Range -40° to +60°C
Maximum Installation Torque 54 N m (40 ft⋅lb)
Operating Voltage Range 9 to 36 Vdc
Diameter
  • 5.2 cm (2.05 in.) without threads
  • 5.8 cm (2.3 in.) including threads
Maximum Cable Length 304.8 m (1,000 ft)
Length 0.55 m/1.05 m (21.5 in./41.2 in.) depending on the option ordered
Weight 1.9 kg/3.6 kg (4.2 lb/7.9 lb) depending on the option ordered

Current Drain

Active ~64 mA (@ 12 Vdc)
Quiescent ~1.5 mA (@ 12 Vdc)

Measurement Depths

0.5 m Option 5, 10, 20, 30, 40, and 50 cm (2, 4, 8, 12, 16, and 20 in.)
1 m Option 5, 10, 20, 30, 40, 50, 60, 75, and 100 cm (2, 4, 8, 12, 16, 20, 24, 30, and 40 in.)

Electrical Conductivity

Range 0 to 10 dS/m
Accuracy
  • ±2% (0 to 2.5 dS/m)
  • ±5% (full range)

Relative Dielectric Permittivity

Range 1 to 80
Accuracy ±1 permittivity unit (between 4 and 42 permittivity)

Volumetric Water Content

Range 0 to 100%
Water Content Accuracy ±1.5% typical with most soils

Soils with high organic matter (> 12% soil organic carbon) or high clay content (> 45% clay) may need a soil-specific calibration due to the dispersive nature of these materials.

Soil Temperature

Accuracy ± 0.15°C (between -30° and +40°C)

Compatibilidade

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Data Loggers

Product Compatible Note
Aspen 10
CR1000 (retired)
CR1000X
CR300
CR3000 (retired)
CR310
CR350
CR6
CR800 (retired)
CR850 (retired)

Downloads

SoilVue 10 Example Program v.1 (1 KB) 03-12-2020

This example CR6 program collects the volumetric water content, relative permittivity, soil temperature, and bulk electrical conductivity for each depth of a 0.5 m SoilVue 10 probe.


Estudos de Caso

United Kingdom: Pioneering Research in Carbon Sequestration
Overview In the fight against climate change, innovative solutions are emerging to address the global challenge......Leia mais
Zambia: Strengthening Climate Resilience
Overview In May 2019, the Government of Zambia embarked on the Central Asia Water & Energy......Leia mais
The Kingdom of eSwatini: Strengthening Early Warning Systems and Climate Services
Overview The Kingdom of eSwatini in Southern Africa—with its agricultural-based economy and a population of less......Leia mais
Utah: Flux Stations
The Utah Geological Survey, supported by the Utah Division of Water Rights, has constructed a......Leia mais

Artigos e Comunicados de Imprensa