SURVEYOR PC-Based Data Acquisition
Flexible PC Data Acquisition and Signal Processing
Designed for your high-fidelity measurements
clima estudos de caso água estudos de caso energia estudos de caso gas flux and turbulence estudos de caso infraestrutura estudos de caso terra estudos de caso

Visão Geral

Current Version: 1.00

Campbell Scientific SURVEYOR is a scientific data collection, statistical analysis, and visual display/graphing software package with an intuitive interface. SURVEYOR helps you quickly create and run tests using your GRANITE™ measurement modules directly from your PC. (To use SURVEYOR, you do not need CRBasic programming knowledge or a data logger.) After you have developed and reviewed your newly created test, SURVEYOR can create the CRBasic program, or a DBC file to attach the module to any CAN-based data-acquisition system (DAQ). 

Leia mais

Benefícios e Características

  • Simple-to-use interface
  • Configures your GRANITE™ measurement device
  • Easy, real-time data visualization
  • Data storage in Excel or ViewPro
  • Automatic creation of DBC file for CANbus-based DAQ systems
  • Automatic CRBasic program creation
  • Can be downloaded free of charge; see Downloads section or Download Now button on web page

imagens

Sample graphical output
Sample graphical output
Sample graphical output

Descrição Técnica

Campbell Scientific SURVEYOR was designed expressly for use in the lab and in the field. This simple-to-use, easy-to-work-with software maintains the high-fidelity measurements you have come to expect from Campbell Scientific. In the event that you do need some assistance, help is available by clicking any of the question mark icons or from the Help menu.

Communication

Campbell Scientific SURVEYOR allows you to set up and collect data from the sensors connected to Campbell Scientific GRANITE™ modules. SURVEYOR requires a direct USB connection to a 10 to 32 Vdc power supply applied to the GRANITE™ module.

Note: SURVEYOR only stores data to files in real time. It cannot be used to collect historical data files. To collect historical data files, a data-acquisition system (DAQ) with LoggerNet or RTDAQ software is required.

Data Process and Display

Campbell Scientific SURVEYOR collects and stores data in comma-separated or binary files on your PC. Those files can be viewed with Microsoft Excel (CSV) or ViewPro (TOB1, TOA5). SURVEYOR displays data in real time in graphical form.

Programming

Campbell Scientific SURVEYOR includes a CRBasic program or DBC file generator. Programs created with SURVEYOR can be sent to the data-acquisition system using LoggerNet, RTDAQ, or Device Configuration Utility for any Campbell Scientific data loggers. Alternatively, the programs can be sent using the DBC file for CAN-based DAQ systems. 

License for Use

Campbell Scientific SURVEYOR is copyrighted software. Campbell Scientific distributes this software free of charge to enable users to work with Campbell Scientific data-acquisition equipment. Campbell Scientific SURVEYOR may be freely copied; however, neither Campbell Scientific SURVEYOR nor any of its files may be sold or included in any other software or altered in any way without prior permission from Campbell Scientific, Inc.

Limited Warranty

Campbell Scientific, Inc., does not warrant that the software will meet licensee’s requirements or that the software or documentation are error free or that the operation of the software will be uninterrupted. Campbell Scientific, Inc., is not responsible for problems caused by computer hardware, computer operating systems or the use of Campbell Scientific, Inc.’s software with non-Campbell Scientific, Inc. software.

All warranties of merchantability and fitness for a particular purpose are disclaimed and excluded. Campbell Scientific, Inc., shall not in any case be liable for special, incidental, consequential, indirect, or other similar damages even if Campbell Scientific, Inc., has been advised of the possibility of such damages.

Campbell Scientific, Inc., is not responsible for any costs incurred as result of lost profits or revenue, loss of use of the software, loss of data, cost of re-creating lost data, the cost of any substitute program, claims by any party other than licensee, or for other similar costs.

Licensee’s sole and exclusive remedy is set forth in this limited warranty. Campbell Scientific, Inc.’s aggregate liability arising from, or relating to, this agreement or the software or documentation (regardless of the form of action; e.g., contract, tort, computer malpractice, fraud and/or otherwise) is limited to the purchase price paid by the licensee.

Especificações

Current Version 1.00
Operating System 64-bit Windows 10, 8, or 7

Compatibilidade

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Measurement and Control

Product Compatible Note
CDM-A108 Requires OS version 6 or greater.
CDM-A116 (retired) Requires OS version 6 or greater.
GRANITE TEMP 120 Requires OS version 1 or greater.
GRANITE VOLT 108 Requires OS version 6 or greater.
GRANITE VOLT 116 Requires OS version 6 or greater.

Additional Compatibility Information

Computer Requirements

Recommended computer operating systems—64-bit Windows 7, 8, or 10

Communications

Only direct connection between the PC and data-acquisition system is supported (telecommunications are not supported and neither is scheduled data collection).

Documentos Relacionados

Videos & Tutoriais

Downloads

CS SURVEYOR v.1.01 (86 MB) 17-12-2019

CS SURVEYOR is a PC-based scientific data collection, statistical analysis, and visual display/graphing software package with an intuitive interface for used with GRANITE™ measurement modules.

Supported Operating System: 64-bit Windows 10, 8, or 7

Visualize o Histórico de Revisões

Perguntas Frequentes Relacionadas

Number of FAQs related to SURVEYOR: 1

  1. Yes, as long as each instance of the software is connected to a separate GRANITE™ measurement device via a separate USB cable and COM port.