Displaying 161 - 177 of 177 articles
Autor: Barbra Utley | Ultima atualização: 08/12/2015 | Comentários: 3
You’ve collected your measurement data, but how do you easily make sense out of it? How can you simplify the post-processing of your data and start analyzing it sooner? In this article, I’ll explain how adding some code to your CRBasic program can save you...
Leia mais
Autor: Janet Albers | Ultima atualização: 08/05/2015 | Comentários: 0
Why should you use a Constant declaration in your CRBasic program? What is a Constant anyway? In a previous article ("Going Public with Your Variables in CRBasic"), we talked about the Public and Dim variable declarations. Variables are just that—variable; they change. Constants, on the other hand, don’t change;...
Leia mais
Autor: Robin Deissinger | Ultima atualização: 07/29/2015 | Comentários: 1
If you use automatic water-sampling equipment, consider performing a maintenance check-up during the month of August, which is National Water Quality Month in the U.S. When you perform a maintenance check-up, you can help ensure that your equipment is operating at an optimal level and that you...
Leia mais
Autor: Janet Albers | Ultima atualização: 07/21/2015 | Comentários: 0
Copying or transposing has become easier with OS 28 (CR6 OS 1). This new operating system enables you to copy portions of an array to a new location, such as when transposing rows and columns.
In this example we start with A(3,2) (3 rows, 2 columns) initialized as...
Leia mais
Autor: Jacob Davis | Ultima atualização: 07/15/2015 | Comentários: 0
Your data is valuable, and sometimes that value is reduced if unauthorized users have access to it. For this reason, Campbell Scientific data loggers have numerous methods of restricting access to your data. This article is an overview of four available methods for securing your...
Leia mais
Autor: Jason Ritter | Ultima atualização: 07/08/2015 | Comentários: 0
Are your current troubleshooting methods not as helpful as you’d like them to be? This article discusses a number of troubleshooting best practices you can use, which may help you determine the source of the problem and resume your data collection more quickly. When I...
Leia mais
Autor: Janet Albers | Ultima atualização: 07/01/2015 | Comentários: 0
You can perform more complex scaling in an array without needing a For/Next loop. To take advantage of this feature, use OS 28 (CR6 OS 01) or later.
In this example program, a unique set of multipliers and offsets is applied to the column of an...
Leia mais
Autor: Jacob Davis | Ultima atualização: 06/17/2015 | Comentários: 3
Through programming, relatively slow SDI-12 measurements can coexist, without problems, alongside fast measurements. To illustrate the need for accommodations in your data logger program, I will share the story of the worst sunburn I ever got. Southern Peru is near the Pacific Ocean, yet is...
Leia mais
Autor: Janet Albers | Ultima atualização: 06/10/2015 | Comentários: 0
Initializing variables within an array is more flexible than ever with OS 28 (CR6 OS 1). You can think of a single dimensioned array as numbers in a column. Two dimensions, in comparison, puts numbers in rows and columns. The third dimension is a page.
For example:...
Leia mais
Autor: Dana Worley | Ultima atualização: 06/03/2015 | Comentários: 0
If you are a user of our LoggerNet software, you know that the software can be configured to collect data from your data logger on a regular interval. From a data logger's Schedule tab in the Setup Screen, you can configure an interval of anywhere...
Leia mais
Autor: Jacob Davis | Ultima atualização: 05/29/2015 | Comentários: 9
Your data logger may record great data, but if you can't retrieve it, the data isn’t going to do you much good. To ensure your successful data retrieval, it’s essential that you can troubleshoot possible problems that may arise with PC-to-data-logger communication over a serial...
Leia mais
Autor: Bruce Smith | Ultima atualização: 05/29/2015 | Comentários: 0
Solar radiation is an important measurement for many researchers and those who are monitoring their evapotranspiration values for irrigation purposes. If you have been wondering how accurate your solar radiation measurement is, Apogee Instruments (an associated company of Campbell Scientific) has a Clear Sky Calculator mobile...
Leia mais
Autor: Dana Worley | Ultima atualização: 05/29/2015 | Comentários: 0
When you live in a cold-weather climate like we do here in northern Utah, it’s a welcome reprieve to spend a few days away enjoying someplace sunny and warm. A couple of days ago, as I was uploading photos of sunshine and blue skies from...
Leia mais
Autor: Janet Albers | Ultima atualização: 05/29/2015 | Comentários: 0
A keyboard display, such as the external CR1000KD or on-board display of the CR850 and CR3000, is a powerful tool you can use in the field. A keyboard display enables you to interrogate and program a data logger independent of other telecommunication links.
Most keys on...
Leia mais
Autor: Robin Deissinger | Ultima atualização: 05/29/2015 | Comentários: 0
Which of these sounds like you? I need help with the basic stuff. How do I know what kind of measurement equipment I need? When I get it, how do I set it up correctly?
I need programming help. How do I make sure I'm getting...
Leia mais
Autor: Janet Albers | Ultima atualização: 05/29/2015 | Comentários: 0
When programming your Campbell Scientific data logger, have you ever wondered whether you should be using a Dim variable declaration or a Public one? What is the difference between them, and when is it best to use each one?
Dim and Public variables are temporary holding...
Leia mais
Autor: Janet Albers | Ultima atualização: 05/29/2015 | Comentários: 0
The newest operating system released by Campbell Scientific for its data loggers is OS 28 for the CR800, CR1000, and CR3000. (The comparable operating system version for the CR6 datalogger is OS 01.) This powerful data logger OS has been enhanced so that you can...
Leia mais
