Displaying 1 - 13 of 13 articles
Autor: Ajay Singh | Ultima atualização: 01/15/2024 | Comentários: 0
Campbell Scientific’s CS223 Pt-1000 Class A, Back-of-Module Temperature Sensor (discontinued effective 31 October 2023) has been replaced by the CS241 Pt-1000 Class A, Back-of-Module Temperature Sensor. When needed, you can replace the CS223 sensor head with a CS241 head without having to replace the entire...
Leia mais
Autor: Ben Todt | Ultima atualização: 12/04/2023 | Comentários: 0
Should you be concerned about the impact of soiling or fouling on your photovoltaic (PV) power plant performance? Did you know that in a recent estimate, more than US$6 billion of annual revenue is lost because of diminished power generation at PV facilities due to...
Leia mais
Autor: Libbie Anderson | Ultima atualização: 05/05/2022 | Comentários: 0
At Campbell Scientific, we redesigned our back-of-module temperature sensors and launched the CS241 and CS241DM purpose-built sensors to optimize performance on bifacial photovoltaic (PV) modules and help you collect data as precisely as possible. These newer sensors have some similarities to our previous sensor models, but...
Leia mais
Autor: Ajay Singh | Ultima atualização: 10/13/2020 | Comentários: 0
When we are faced with challenges, there is often an opportunity for improvement. In this blog article, learn how our engineers redesigned our back-of-module (BOM) temperature sensor to resolve specific challenges that impacted the quality of bifacial solar photovoltaic (PV) panel performance monitoring.
Bifacial PV panels...
Leia mais
Autor: Libbie Anderson | Ultima atualização: 09/21/2020 | Comentários: 2
Solar photovoltaic (PV) monitoring projects often use a variety of sensors to gain information about the site performance and its available resources. To obtain this information, solar-monitoring sensors need to be connected to a database that can collect, evaluate, visualize, and interpret data from all...
Leia mais
Autor: Libbie Anderson | Ultima atualização: 06/29/2020 | Comentários: 0
You may have heard of the IEC 61724-1 standard to promote international uniformity in PV (photovoltaic) system performance monitoring. But why was it created, and what does it mean for you? In this interview with PES (Power & Energy Solutions), Matt Perry, Technical Product Manager for...
Leia mais
Autor: Libbie Anderson | Ultima atualização: 06/10/2020 | Comentários: 0
At Campbell Scientific, we understand the value of your solar energy farms and the necessity to keep these energy-producing facilities in top condition. To help you monitor their efficiency, we’ve designed innovative solar monitoring equipment that has been tested through deployments all over the world....
Leia mais
Autor: Libbie Anderson | Ultima atualização: 05/01/2020 | Comentários: 0
On every utility-scale solar farm, it’s crucial to answer the fundamental question: how much solar radiation reaches the surface of the photovoltaic (PV) modules? These farms span hundreds of acres and in order to address this question, owners use meteorological monitoring stations and data loggers...
Leia mais
Autor: Matt Perry | Ultima atualização: 12/12/2018 | Comentários: 1
Plane of array irradiance (POA) is a well-known term used to quantify the incident irradiance on a given solar array. It is the parameter most directly related to the power output of a PV module and is used extensively in PV performance analysis and modeling...
Leia mais
Autor: Matt Perry | Ultima atualização: 01/17/2018 | Comentários: 0
During 2017, I was asked several times for a data logger program to retrieve data from Kipp & Zonen’s new RaZON+, a compact-sized dual-axis sun tracker with integrated GPS, smart pyrheliometer, and shaded smart pyranometer. The RaZON+ touts a higher accuracy approach to obtaining solar...
Leia mais
Autor: Paul Smart | Ultima atualização: 09/02/2016 | Comentários: 1
Turning your Campbell Scientific data logger into a DNP3 outstation is a great way to allow systems that use the DNP3 protocol to have access to your live measurement data, as well as historical data. When you use your data logger as a DNP3 outstation, the...
Leia mais
Autor: Paul Smart | Ultima atualização: 01/20/2016 | Comentários: 0
Have you heard of DNP3 but been unsure of what it is or what it’s used for? In this brief article, I’ll introduce you to this communications protocol, its role in SCADA applications, and how you can use it with your Campbell Scientific equipment and...
Leia mais
Autor: Robin Deissinger | Ultima atualização: 10/28/2015 | Comentários: 4
We asked our integrators, those folks who sell and install our products, to send us their best photos of Campbell Scientific equipment operating in the field. From all of their submissions, we selected a photo from Western Weather Group as the first-place winner. Runners-up photo...
Leia mais
