Displaying 1 - 19 of 19 articles tagged with: CR6
Autor: Timothy Jeppsen | Ultima atualização: 03/19/2020 | Comentários: 4
We recently released the CR1000X Measurement and Control Datalogger, and you may be wondering how it compares with our widely used CR1000 datalogger and our innovative CR6 datalogger. If you’re in the market for a new data logger, how do you know which one is... Leia mais
Autor: Kevin Rhodes | Ultima atualização: 12/02/2019 | Comentários: 0
Sometimes, it’s hard to let go. But if we don’t let go, we don’t have empty hands ready to embrace something new—even a data logger.
The CR1000 Measurement and Control Datalogger (introduced in 2004) has been incredibly successful with installations on every continent of our planet.... Leia mais
Autor: Nathanael Wright | Ultima atualização: 01/16/2019 | Comentários: 0
Did you know you can monitor your data usage using CRBasic program code on our new data loggers with integrated cellular modems and our external Campbell Scientific brand of cellular modules? In this two-part series, I’ll first show you how to do this in the... Leia mais
Autor: Jacob Davis | Ultima atualização: 02/28/2018 | Comentários: 1
Now and then, someone will ask if a Campbell Scientific data logger can be used in place of a PLC (programmable logic controller) or an RTU (remote terminal unit). Admittedly, it is not a simple question to answer. The capabilities of modern PLCs, RTUs, and... Leia mais
Autor: Matt Perry | Ultima atualização: 01/17/2018 | Comentários: 0
During 2017, I was asked several times for a data logger program to retrieve data from Kipp & Zonen’s new RaZON+, a compact-sized dual-axis sun tracker with integrated GPS, smart pyrheliometer, and shaded smart pyranometer. The RaZON+ touts a higher accuracy approach to obtaining solar... Leia mais
Autor: Michelle Welch | Ultima atualização: 01/04/2018 | Comentários: 2
Did you know that you are just a click or tap away from new and improved online data logger assistance? If you have a CR1000X, CR6, or CR300-series datalogger, you’ll want to visit our new resource that is available to you 24/7.
Our new online user... Leia mais
Autor: Dana Worley | Ultima atualização: 08/30/2017 | Comentários: 3
If you have read recent revision history for the Device Configuration Utility (also known as DevConfig), you may have run across the following note: “New USB drivers (RNDIS) were added for [supported] datalogger.” What's that all about? you may have wondered.
Sounds boring, eh?
We think it... Leia mais
Autor: Timothy Jeppsen | Ultima atualização: 08/02/2017 | Comentários: 3
It should come as no surprise that the CR1000 datalogger (introduced in 2004) has been an incredibly successful data logger. With nearly 100,000 deployed, this data logger has been installed on every continent on the earth. Using the design success of the CR1000, Campbell Scientific... Leia mais
Autor: Robin Deissinger | Ultima atualização: 01/11/2017 | Comentários: 0
In this short interview, Sam Utley, the product manager for the new CR310, tells us about the enhanced functionality this data logger provides and why he feels the CR310 offers exciting possibilities for our customers. Sam is a member of the Product Management (PM) team... Leia mais
Autor: Dana Worley | Ultima atualização: 12/07/2016 | Comentários: 2
The Internet of Things offers a lot of advantages in today’s culture. There are consumer devices that let you monitor and control mood lighting and music in your home, keep track of last week’s leftover dinner in your refrigerator, and help you brew a cup... Leia mais
Autor: Barbra Utley | Ultima atualização: 10/28/2016 | Comentários: 0
Whether you measure and monitor conditions for flooding, road weather, aviation, fire, or avalanches, your data is important to you and those with whom you share it. Oftentimes, sharing your data quickly is critical, as conditions may change rapidly and require prompt action. In this... Leia mais
Autor: Sam Utley | Ultima atualização: 03/23/2016 | Comentários: 10
Note: It appears that after this blog article was written, Weather Underground has been phasing out the “PWS – Upload Protocol.” The following tutorial may or may not work currently or in the future. However, it continues to offer some insight into structuring a CRBasic... Leia mais
Autor: Gary Roberts | Ultima atualização: 03/02/2016 | Comentários: 1
Would it be helpful to include data from a reputable source with your own data? If you have permission to use another source’s data for free or by agreement, how can you easily extract the specific data you want to use without doing a lot... Leia mais
Autor: Andrew Sandford | Ultima atualização: 12/23/2015 | Comentários: 0
Do you have a network of devices, connected using MD485 interfaces, so spread out that extremely long cables are required? Are you worried that the distances, and resultant cable lengths, may be causing communication problems? In this brief article, we’ll look at four tips that... Leia mais
Autor: Robin Deissinger | Ultima atualização: 10/28/2015 | Comentários: 4
We asked our integrators, those folks who sell and install our products, to send us their best photos of Campbell Scientific equipment operating in the field. From all of their submissions, we selected a photo from Western Weather Group as the first-place winner. Runners-up photo... Leia mais
Autor: Janet Albers | Ultima atualização: 07/21/2015 | Comentários: 0
Copying or transposing has become easier with OS 28 (CR6 OS 1). This new operating system enables you to copy portions of an array to a new location, such as when transposing rows and columns.
In this example we start with A(3,2) (3 rows, 2 columns) initialized as... Leia mais
Autor: Janet Albers | Ultima atualização: 07/01/2015 | Comentários: 0
You can perform more complex scaling in an array without needing a For/Next loop. To take advantage of this feature, use OS 28 (CR6 OS 01) or later.
In this example program, a unique set of multipliers and offsets is applied to the column of an... Leia mais
Autor: Janet Albers | Ultima atualização: 06/10/2015 | Comentários: 0
Initializing variables within an array is more flexible than ever with OS 28 (CR6 OS 1). You can think of a single dimensioned array as numbers in a column. Two dimensions, in comparison, puts numbers in rows and columns. The third dimension is a page.
For example:... Leia mais
Autor: Janet Albers | Ultima atualização: 05/29/2015 | Comentários: 0
The newest operating system released by Campbell Scientific for its data loggers is OS 28 for the CR800, CR1000, and CR3000. (The comparable operating system version for the CR6 datalogger is OS 01.) This powerful data logger OS has been enhanced so that you can... Leia mais