Displaying 21 - 40 of 51 articles
Autor: Michelle Welch | Ultima atualização: 01/04/2018 | Comentários: 2
Did you know that you are just a click or tap away from new and improved online data logger assistance? If you have a CR1000X, CR6, or CR300-series datalogger, you’ll want to visit our new resource that is available to you 24/7.
Our new online user... Leia mais
Autor: Jacob Davis | Ultima atualização: 12/22/2017 | Comentários: 0
Just recently, the KRACK (Key Reinstallation AttaCK) Wi-Fi vulnerability was publicized. You might be wondering what it is and how it affects the security of your Campbell Scientific devices and data.
The KRACK vulnerability exists in the WPA2 (Wi-Fi Protected Access II) security standard used on... Leia mais
Autor: Timothy Jeppsen | Ultima atualização: 11/29/2017 | Comentários: 0
What do expansion peripherals do, and how is integrating them helpful? Expansion peripherals have two purposes: to expand the capabilities of the data logger, both in channel count and functionality, and to improve measurement quality. What if we could provide both and make it easier... Leia mais
Autor: Timothy Jeppsen | Ultima atualização: 10/11/2017 | Comentários: 6
As soon as people learned that we were replacing the CR1000 datalogger with the CR1000X datalogger, they asked us these questions: “Can I load a program I wrote for my CR1000 into a CR1000X?” and “Will the CR1000X fit in the same space as my... Leia mais
Autor: Dana Worley | Ultima atualização: 08/30/2017 | Comentários: 3
If you have read recent revision history for the Device Configuration Utility (also known as DevConfig), you may have run across the following note: “New USB drivers (RNDIS) were added for [supported] datalogger.” What's that all about? you may have wondered.
Sounds boring, eh?
We think it... Leia mais
Autor: Timothy Jeppsen | Ultima atualização: 08/02/2017 | Comentários: 3
It should come as no surprise that the CR1000 datalogger (introduced in 2004) has been an incredibly successful data logger. With nearly 100,000 deployed, this data logger has been installed on every continent on the earth. Using the design success of the CR1000, Campbell Scientific... Leia mais
Autor: Janet Albers | Ultima atualização: 06/28/2017 | Comentários: 0
Security codes are the oldest method of securing a data logger. They can effectively prevent innocent tinkering and discourage wannabe hackers—actions that could potentially wreak havoc on the integrity of your data. In this article, I’ll discuss the different security codes and how to use... Leia mais
Autor: Gary Roberts | Ultima atualização: 05/31/2017 | Comentários: 2
Maybe you’re like me when it comes to skipped scans. I have always disliked seeing skipped scans in my data loggers. I have been trained to watch out for them and do my best to write my CRBasic programs in a way that makes them... Leia mais
Autor: Jacob Davis | Ultima atualização: 02/22/2017 | Comentários: 2
Have you come across situations where you want your data logger to initiate data retrieval, rather than your PC? For example, do you have an environmental condition that you want to transmit alarm data for?
Although IP-based communication is prevalent, sometimes you may need data-logger-initiated communication... Leia mais
Autor: Dana Worley | Ultima atualização: 01/25/2017 | Comentários: 16
Have you had problems finding an SMTP server to use to send emails from your data logger? Are compatibility issues causing you to look for a work-around? Keep reading for a solution that may be just what you need.
In 2006, we added the ability... Leia mais
Autor: Robin Deissinger | Ultima atualização: 01/11/2017 | Comentários: 0
In this short interview, Sam Utley, the product manager for the new CR310, tells us about the enhanced functionality this data logger provides and why he feels the CR310 offers exciting possibilities for our customers. Sam is a member of the Product Management (PM) team... Leia mais
Autor: Dana Worley | Ultima atualização: 09/28/2016 | Comentários: 2
We all remember the year 2000 as the year that The World As We Know It would come to an end. Computer systems were predicted to come crashing down on January 1, leaving in their wake failing infrastructure that would affect millions of lives. In... Leia mais
Autor: Janet Albers | Ultima atualização: 09/15/2016 | Comentários: 2
It’s common for our customers to wonder when their data logger memory is going to be full, what will happen to their data when the memory is full, and what they should do about it. After all, your data is specific to your application and... Leia mais
Autor: Jacob Davis | Ultima atualização: 05/18/2016 | Comentários: 0
When was the last time you checked the air pressure on your automobile’s spare tire? What if you were driving along, got a flat tire, and discovered that your spare tire was flat as well? We don’t often think about our spare tire until we... Leia mais
Autor: Jacob Davis | Ultima atualização: 04/21/2016 | Comentários: 0
Have you ever had a sensor work on a P (pulse) data logger terminal, but not on a C (control) terminal? Is the list of choices for the PConfig parameter in the PulseCount() instruction daunting? Campbell Scientific data loggers offer several options for measuring pulse... Leia mais
Autor: Robin Deissinger | Ultima atualização: 03/16/2016 | Comentários: 3
In this short interview, Kevin Rhodes, the product manager for the new CR300, tells us how this new data logger will be helpful to Campbell Scientific customers and why he thinks the CR300 is a great value. Kevin is the Director of Product Management at... Leia mais
Autor: Janet Albers | Ultima atualização: 02/10/2016 | Comentários: 0
Periodically we release new operating systems (OSs) that include new functions and instructions, as well as enhancements or bug fixes for existing functions and instructions. If you are asked to update your OS or need a newly added feature for your application, this article provides... Leia mais
Autor: Gary Roberts | Ultima atualização: 12/09/2015 | Comentários: 1
Have you ever wanted the ability to control your Raven cellular modem with your data logger? Would it be nice to be able to get data on the health of your cellular modem and its data network? Maybe you even want to reset your Raven... Leia mais
Autor: Dana Worley | Ultima atualização: 11/18/2015 | Comentários: 0
When you have work to do, there’s nothing more frustrating than being unable to connect to your data logger in the field. We’ve all been there: You’re in LoggerNet’s Connect window pressing the Connect button, and you’re met with nothing but the endless flashing “connecting... Leia mais
Autor: Jacob Davis | Ultima atualização: 10/14/2015 | Comentários: 0
Are you configuring your data logger but confused about all the IP (Internet Protocol) settings? Do you know what the settings mean and what you should set them to?
Most of us data logger users do not have a background in computer science or network administration.... Leia mais