LoggerNet Patch 4.7
Atualizada: 16-03-2021

  1. LoggerNet - One of the main efforts in the development of LoggerNet 4.7 has been support for the new CR350 Series datalogger. (Note that in the main LoggerNet interface, the CR350 is considered a CR300Series datalogger. However, in Device Configuration Utility, Short Cut, and the CRBasic Editor, it is a separate device.)
  2. LoggerNet - An Allowed Neighbors tab has also been added to the PakBusPort device. This allows you to specify a list of PakBus addresses that the port will accept as neighbors.
  3. LoggerNet - In addition, a Neighbor PakBus Address field has been added to the Datalogger Settings screen in the EZSetup Wizard. This allows you to specify the neighbor you will go through to connect to your datalogger. For example, this can be used to enter the PakBus address of a Konect PakBus router.
  4. LoggerNet - Also, a TCP Password field has been added to the Security Settings screen in the EZSetup Wizard to control IP access to a datalogger.
  5. LoggerNet - In LoggerNet Admin, you can now add, delete, and edit stations while viewing a subnet. Previously, you had to change your view to the whole network before making station changes.
  6. LoggerNet - A Software Updater has been added to LoggerNet and Device Configuration Utility that can automatically notify you and update your software when a new release is available. See LoggerNet Options.
  7. LoggerNet - Users of Campbell Scientific's LNDB database software who are using a PostgreSQL or Oracle database can now access the data directly from the database with View Pro. In addition, View Pro now allows you to set graphs to start maximized, set default settings for all new line graphs, and jump to the beginning or end of a line graph.
  8. LoggerNet - RTMC and RTMC Run-Time have been updated to version 5.0.
  9. LoggerNet - Note: If you are using an older version of RTMC Pro and plan to continue creating RTMC projects, we recommend that you upgrade to RTMC Pro 5.0.
  10. DevConfig - Added support for the CR350 measurement and control datalogger.
  11. DevConfig - Added support for the BaroVUE10 digital barometer.
  12. DevConfig - Added support for the CS250DM PT-1000 Class A, precision air temperature sensor with digital Modbus RS-485 output.
  13. DevConfig - Added support for the GRANITE TEMP 408 isolated thermocouple module.
  14. DevConfig - Added support for the GRANITE VOLT 408 isolated analogue input module.
  15. Short Cut - Support for the CR350.
  16. Short Cut - Support for the GRANITE TEMP 408-K, GRANITE TEMP 408-T, GRANITE VOLT 408-V10, and GRANITE VOLT 408-V60.
  17. Short Cut - Improved 4 to 20 mA Current Input support.
  18. Short Cut - New sensor files: BaroVUE10 (SDI-12) Barometric Pressure Sensor, ClariVUE5/ClariVUE10 Turbidity Meter, MS-80 (Pt100 temp) Secondary Standard Pyranometer, RainVUE10/RainVUE20 Rain Gauge.
  19. Short Cut - Main Processing Board Temperature for GRANITE9 and GRANITE10.
  20. Short Cut - Internal GPS Receiver for GRANITE9 and GRANITE10.
  21. Short Cut - CS250DM (MODBUS RS-485 at 19.2K baud) PT-1000 Class A, Temperature Sensor.