FAQs Frequently Asked Questions about Our Products and Solutions

Faça uma Pergunta Faça uma Pergunta

All FAQs (1726 total: showing 1621-1640)

What is the best way to communicate wirelessly between a PC and a CR3000?
What is the default TCP/IP port that LoggerNet uses to communicate with PakBus™ data loggers?
Does a CR5000 need a 4WPB100 to measure the internal RTD of a 4-way net radiometer?
Where are the holes in the CR3000 to attach it to the backplate of an enclosure?
If a CR3000 has some corroded terminal blocks, can those be replaced?
How is the VX voltage set in a CR3000?
What might cause a CR3000 to be unable to connect with DevConfig?
Is there a way to adjust the timeout on the LCD of the CR3000?
Can two CR3000s, located close to each other, be directly connected?
Does the CR3000 12 Vdc power terminal put out at least 6 mA?
How long does it take to recharge a rechargeable battery base for a CR3000?
How long will the rechargeable battery base of a CR3000 hold its charge?
If multiple CR3000s are linked together via COM1─COM4 ports and configured as neighbors on a PakBus™ network, what is the best way to synchronize the data loggers so that the time stamps match?
Can the CR3000 take input from, and supply power to, different types of sensors that require different voltages?
Other than using an Ethernet connection, is there any way to remotely download data from a CR3000 and adjust the program?
Can a CR3000 be run with a 12 V switchable power supply?
Is there any difference in the hardware between a standard temperature range CR3000 and an extended temperature range CR3000?
How many control terminals are available on the CR3000?
What is the common mode voltage for a CR3000?
Can the CS10-L be used to measure amperage from a battery?

Anterior Próximo