The Campbell Scientific Blog: Your source for useful how-to...

Death Valley, a Year Later

Autor: Dirk Baker | Ultima atualização: 07/29/2022 | Comentários: 5

About a year ago (May 2021), I installed a weather station next to the National Weather Service’s (NWS) official station at Furnace Creek in Death Valley National Park (California, USA). To familiarize yourself with this project, read my previous article. The purposes of this installation... Leia mais

But It’s a Dry Heat… like a Furnace

Autor: Dirk Baker | Ultima atualização: 06/21/2021 | Comentários: 6

In this article, I'll share my experience collaborating on a research project to record some extreme weather conditions that may even set a world record! On August 16, 2020, the weather station located at Furnace Creek in Death Valley National Park (California, USA) recorded a temperature... Leia mais

Evolution Not Revolution: Updating an Established Product Range

Autor: Andrew Sandford | Ultima atualização: 01/06/2020 | Comentários: 0

Imagine that you already have a winning sensor that has sold more than 15,000 units. As time passes, you realize that technology has evolved, but your sensor hasn’t. If you are objective in your product evaluation, you may determine that there is justification for the... Leia mais

Air Temperature and RH Sensors: What You Need to Know

Autor: Bart Nef | Ultima atualização: 05/17/2017 | Comentários: 8

Although air temperature and relative humidity (RH) sensors provide the benefit of an economical means to collect measurement data for two parameters, there are some issues related to these sensors that you should be aware of. In this article, I’ll provide some background on air... Leia mais

Area / Application

Product Category

Activity

Corporate / News

The Campbell Scientific Blog Your source for useful how-to information and helpful expert advice

Tópicos de blog

Pesquisar o Blog

Inscrever-se para o Blog