6 Tips to Protect Your Weather Station from Birds

de Robin Deissinger | Atualizada: 05/25/2016 | Comentários: 0

Pesquisar o Blog


Inscrever-se para o Blog

Receber e-mail quando um novo artigo é publicado. Escolha os temas de seu interesse.


Area / Application

Product Category

Activity

Corporate / News

Insira o seu endereço de email:



Sugerir um artigo

Existe um tópico que você gostaria de saber mais à respeito? Nos informe.

Leave this field empty

great horned owl on top of a weather station

You’ve got your weather station set up and running, your data is coming across just fine, and then a bird decides your station is a wonderful place to make a home. That’s great for the bird, but not so great for the performance of your equipment or the accuracy of your data. How can you humanely encourage your new feathered friend to find a home someplace else? In this article, I’ll provide you with six tips, as well as some product resources, for discouraging birds from becoming too friendly with your equipment.

#1 - Select sensors with deterrents

After selecting sensors that will meet your application needs, such as accuracy requirements, look to see if there are available sensor options or accessories designed to prohibit bird interference. For example, you may select a rain gage with a spike strip to prevent birds from nesting on the gage, or you may select a net radiometer (such as the NR-LITE2-L) that has a rod to deter birds from roosting on the sensor.

NR-LITE2-L net radiometer with rod to deter birds

The WXT520 Weather Sensor, as another example, has an optional 25300 Bird Spike Kit. The spike kit discourages birds from roosting on the WXT520 without hurting them. The kit is fastened to the top of the sensor with the spikes pointing upward. The shape and location of the spikes ensure minimal interference of your wind and rain measurements.

25300 bird spike it

#2 - Create a “bed of nails”

UV-resistant cable ties, such as the 17592 and 7364, are provided with Campbell Scientific tripods and towers.

17592 UV-resistant cable ite

Strap these cable ties along the fuselage of a wind monitor to prevent birds from landing on the sensor. Pull the free end of the ties tight. Instead of trimming the ties back to the locking end, leave the free ends of the ties pointing up, creating a “bed of nails.”

You can also create a “bed of nails” with these ties to prevent birds from landing on masts and crossarms, or even on the arms of sonic anemometers.

#3 - Use bird control wire

Using a pipe clamp, you can strap a strip of bird control wire around the funnel of a tipping bucket rain gage. The needles of the wire should extend up beyond the funnel to prevent roosting.

#4 - Provide another perching option

If birds have another option for perching, they may leave your equipment alone. If it’s feasible, you can install a perch away from your equipment. If that’s not an option, you can install a crossarm (just for the birds to perch on) that is higher than your wind sensors. Just be sure to position the perch so it isn’t directly above any other equipment.

#5 - Use fishing line

Stretch fishing line across the top of the bird landing zone. Ensure the fishing line is two to three inches (5.08 to 7.62 centimeters) above your equipment to help prevent interference with your measurements.

#6 - Install a realistic-looking decoy

Consider installing a visual deterrent, such as a realistic-looking owl decoy. Mount the owl so that it swings and doesn’t become a static figure that the birds become acclimated to. A hawk, for example, may be inclined to attack an owl decoy rather than your equipment.

Other Resources

The following are examples of a few companies that supply bird control products, which you may find helpful:

  • Bird-B-Gone – Products include bird spikes, netting, deterrents, repellents, and visual bird deterrents.
  • Bird-X – Bird products include spikes, netting, visual scares, and predator decoys.
  • Nixalite – Bird control products include bird spikes, netting, repellents, and deterrents.

Conclusion

Weather station performance and data accuracy can be affected by birds that roost, nest, or leave droppings behind. To minimize your maintenance needs and costs, as well as prevent the potential loss of usable data, consider implementing one or more of these tips.

Credits: Stephen Smith of Wade Water LLC and Buena Vida Farm provided the owl photo.

Have you had issues with birds and your equipment? Do you have any bird control tips or stories to share? Post them below.


Compartilhe este artigo



Sobre o autor

robin deissinger Robin Deissinger is the Web Content Specialist at Campbell Scientific, Inc. She creates and maintains content on the company website, which is then shared across the global websites. She also manages the corporate social media program and occasionally contributes blog articles. Robin graduated from Bradley University with a bachelor's degree in communications with an emphasis in advertising, as well as a minor in psychology.

Veja todos os artigos deste autor.


Comentários

Please log in or register to comment.