Visão Geral
This lock washer is included with many of our mounts. The 4366 may be purchased to replace a lost or damaged washer.imagens
Especificações
| Diameter | 0.97 cm (0.38 in.) |
| Height | 0.33 cm (0.13 in.) |
| Weight | 4.54 g (0.01 lb) |
listado em
Other Accessory for the following products:
Replacement Part for the following products:
- ENC100 - Barometer Enclosure
- 18549 - CC Camera or PWD22 Mounting Kit
- CM270 - Rain Gage Mounting Kit for the TE525, TE525MM, or TE525WS
- 18098 - Eppley Solar Sensor or Cellular Antenna Mounting Stand
- CM235 - Magnetic Mounting Stand
- 32788 - 5 W Solar Panel Installed in ENC8/10 Enclosure Lid (enclosure sold separately)
- 19002 - Enclosure Tripod Mast Mounting Kit
- CM210 - Crossarm-to-Pole Mounting Kit
- 19017 - Enclosure Tower Mounting Kit
- ENCTDR100 - Enclosure to Hold Datalogger, SDM8X50-N, and TDR200, 16 x 18 inches
- CM221 - Right-Angle Mounting Kit
- TS100SS - Aspirated Radiation Shield
- CM225 - Solar Sensor Mounting Stand
- CMB200 - Crossarm Brace Kit
- ClimaVue 40 - Compact, Digital, RS-485 Modbus Weather Sensor
- 34344 - MetSens or WINDSONIC Stand Mount
- CM226 - Solar Sensor Mounting Stand with Level and Base
- ClimaVue 50 - Compact Digital Weather Sensor
- 31394 - Fully Adjustable VU01 Mounting Kit
- SDMX50 - 50 Ohm Coaxial Multiplexer with Enclosure
- SP5-L - 5 W Solar Panel
- SP20-LQ - 20 W Solar Panel for RAWS-P
- SP10-LQ - 10 W Solar Panel for RAWS-P
- ASPTC-L - Aspirated Thermocouple with Mounts
- SP10-PW - 10 W Solar Panel for PWENC
- WINDSONIC-LC - Gill 2-D Sonic WInd Sensor with SDI-12 Output for MetData1
- SP20-PW - 20 W Solar Panel for PWENC
- SP20R-PW - 20 W Solar Panel with Regulator for PWENC
- SP70-L - 70 W Solar Panel
- 30626 - 3/4 in. IPS or GPS Antenna Mounting Stand
- 27065 - Reference Cell and RSR Adjustable-Angle Mounting Stand
- 29354 - Wi-Fi Kit for ET Stations
- RAD06 - 6-Plate Solar Radiation Shield
- RAD10 - 10-Plate Solar Radiation Shield for Small Sensors
- RAD14 - 14-Plate Solar Radiation Shield
- SP10R-PW - 10 W Solar Panel with Regulator for PWENC
- 14264 - NR-LITE or CNR1 Mounting Kit
- CM230 - Adjustable Inclination Mounting Kit
- SP1.6 - 1.6 Watt Solar Panel
- SP1.6-L - 1.6 Watt Solar Panel
- WINDSONIC-L - 2-D Sonic Wind Sensor
- ENCTDR - Enclosure for the Tektronix 1502B
- CM202 - 2 ft Crossarm with One CM210 Mounting Kit
- CM204 - 4 ft Crossarm with One CM210 Mounting Kit
- CM206 - 6 ft Crossarm with One CM210 Mounting Kit
- CM220 - Right-Angle Mounting Kit
- 19016 - Tripod Mast Mounts for RAWS Enclosure
- SP5 - 5 W Solar Panel with Connector for ENC200 and TurfWeather Stations
- PD625 - TGA Low Flow Sample Dryer
- PD200T - High-Flow Sample Dryer, 4 ft
- 19018 - Tower Mount for RAWS Enclosure
- ENC200 - Enclosure for CR200X-Series Dataloggers with 5 Cable Entry Seals
- HUB-SDM5 - 5-Channel Hub for SDM Peripherals
- HUB-SDM8 - 8-Channel Hub for SDM Peripherals and Power Connections
Ships with the following:
- SP20 - 20 W Solar Panel
- CM230 - Adjustable Inclination Mounting Kit
- CM270 - Rain Gage Mounting Kit for the TE525, TE525MM, or TE525WS
- 19002 - Enclosure Tripod Mast Mounting Kit
- PD200T - High-Flow Sample Dryer, 4 ft
- SP5-L - 5 W Solar Panel
- CM202 - 2 ft Crossarm with One CM210 Mounting Kit
- CM204 - 4 ft Crossarm with One CM210 Mounting Kit
- CM206 - 6 ft Crossarm with One CM210 Mounting Kit
- 19017 - Enclosure Tower Mounting Kit
- ENC100 - Barometer Enclosure
- 27065 - Reference Cell and RSR Adjustable-Angle Mounting Stand
- CM221 - Right-Angle Mounting Kit
- 29354 - Wi-Fi Kit for ET Stations
- HUB-SDM8 - 8-Channel Hub for SDM Peripherals and Power Connections
- 30626 - 3/4 in. IPS or GPS Antenna Mounting Stand