Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

Connect to CR1000 by tcp/ip

Makada Nov 10, 2020 10:06 AM

Hi,

I would like to know if its possible to connect to the cr1000 by TCP ip.

Do i need extra hardware for it?

I see i can add a root in the setup screen with ipport but from there i dont know what to do.

Whats the ip adress of the cr1000?

With kind regards.

jtrauntvein Nov 10, 2020 02:34 PM

There are several ways that can be used to connect the CR1000 to a TCP/IP network:

- connect an NL116 to the datalogger expansion port.  This approach provides the fastest link.

- connect the datalogger to a cell modem such as the CELL2xx or the RV50 to the datalogger's RS-232, COM1, COM3, COM5, or COM7 ports.  An SC105 can also be used to connect the cell modem via one of the interfaces available in the CSIO port.

- connect the datalogger to an Ethernet network using an NL121 or to a WiFi network using the NL241

Makada Nov 11, 2020 06:32 AM

Ok, thanks alot for the answer.

With kindest regards.

Log in or register to post/reply in the forum.