ENCTDR100 Enclosure to Hold Datalogger, SDM8X50-N, and TDR200, 16 x 18 inches
Rugged, Versatile
Campbell components mount easily and securely
clima estudos de caso água estudos de caso energia estudos de caso gas flux and turbulence estudos de caso infraestrutura estudos de caso terra estudos de caso

Visão Geral

The ENCTDR100 is a white fiberglass-reinforced polyester enclosure that protects the TDR equipment from weather, condensing humidity, and dust. With internal dimensions of 16" x 18" x 8", it can house the data logger, power supply, TDR200, and SDM8X50-N.

Note: In the image above, the ENCTDR100 is shown with the SDM8X50, PS150, TDR200, and CR1000. These items are sold separately.

Benefícios e Características

  • White, UV-stabilized enclosure reflects solar radiation—reducing temperature gradients inside the enclosure without requiring a separate radiation shield

imagens

Especificações

Dimensions
  • 40.6 x 45.7 x 20.3 cm (16.0 x 18.0 x 8.0 in.) internal
  • 41.9 x 47.0 x 27.9 cm (16.5 x 18.5 x 11.0 in.) external
Weight 9.7 kg (21.4 lb)

Perguntas Frequentes Relacionadas

Number of FAQs related to ENCTDR100: 2

  1. What factors affect the amount of desiccant needed in an enclosure?

    There is not an easy way to calculate how much desiccant is needed in an enclosure or how quickly the desiccant will need to be replaced. The following conditions affect the replacement interval:

    • How much humidity the enclosure is exposed to
    • The size of the enclosure
    • How often the enclosure door is opened and how long the door remains open
    • How airtight the enclosure is

    It may be advantageous to use more than one desiccant packet at a time inside an enclosure. Campbell Scientific recommends keeping an extra supply of desiccant on hand for as-needed replacement in the enclosure.

  2. When should the desiccant inside an enclosure be replaced?

    The desiccant should be replaced when the top colored dot on the humidity indicator card (pn 28878) turns pink; the humidity indicator card is included in the enclosure supply kit that is shipped with each enclosure. If the CS210, Enclosure Humidity Sensor, is used, replace the desiccant when the measured humidity exceeds 35%.

Visite a FAQ Biblioteca